
Emergency Stop Button with Visual Indicator and Protection Guard, Push Pull to Release, 40mm, Includes 1 NC and 1 NO Contact in a Yellow IP65 Enclosure, cCSAus
The Emergency Stop Button with Printed Yellow IP65 Enclosure equipped with one 40mm guarded push-pull estop switch and one normally closed positive opening contact, PL004001 and one normally open contact, PL004002.
This emergency stop button has horizontal wire entry knockouts, 1 M20 Thread and 1 M16 thread. The emergency push button is protected from accidental operation with a 4-prong guard. The push-pull e-stop push button used in the emergency stop button enclosure has an ingress protection rating of IP66, 67, 69K which is at minimum equivalent to NEMA 4 and NEMA 4x.
The push-pull red emergency stop switch is mounted in a yellow IP65 rated enclosure with a guard to fully comply with all machine safety emergency stop button regulations including EN ISO 13850 and IEC/EN60204-1.
Other options of an emergency stop button with enclosure include estop stations that can be equipped with a twist to release estop button, an emergency stop push button with key or 30mm, 40mm or 60mm estop buttons.
A low cost, low profile emergency stop button with enclosure, the TLP1.EPP is available where both space and cost is of concern.
Product Features
- E-Stop Push Button Control Station with Pull to Release Push Buttons
- Waterproof NEMA 4X/IP65
- Shockproof and Heat Resistant Double Insulated Housing
Specifications
Color: | Red/Yellow |
Contact Configuration: | 1NO/1NC |
Contact Rating: | 16 A @ 600Vac |
Dimensions (L x W x H): | 75x75x87.1 mm (2.953x2.953x3.429") |
Emergency Stop Button: | Yes |
Housing: | E-Stop Enclosure |
Motor Control Speed: | Single |
Number of Operators: | 1 |
Operator Type: | Push-Pull |
Protection Type: | IP65 |
Emergency Stop Specifications Sheet (PDF)
Delco Giovenzana Cartop Stations and Switches Product Line (PDF)
Delco SKU: A-SLA11NPNC001
